Auto Menu Disable; Internal Patterns - Barco Duet II Owner's Manual

6.6

Auto Menu Disable

What can be done?
When the Auto Menu disable setting is set to 'On' and no key is pressed during the first 10 seconds the BARCO Duet II automatically
will close all menu's and exit the adjustment mode. To disable this '10 seconds adjustment time' set the Auto Menu disable to 'Off".
How to adjust the Auto Menu Disable Setting?
1. Push the cursor key ↑ or ↓ to highlight Auto Menu Disable. (menu 6-21)
2. Press ENTER to select.
The Auto Menu Disable menu will be displayed. (menu 6-22)
3. Push the cursor key ↑ or ↓ to select the desired Auto Menu Disable Setting.
4. Press ENTER to confirm.
Duet II Interface
Output Parameter
Input Parameter
Stereo FreeRun
Auto Menu disable

Internal patterns

WND 264 Installed
Please select item
Menu 6-21
The current Auto Menu Disable Setting is displayed on top of the menu.
6.7 Internal Patterns
What can be done?
The projector is equipped with different internal patterns which can be used for adjustment purposes.
Available patterns
- Outline
- Phase Adjustment
- Checker Board
How to Display an Internal Pattern?
1. Push the cursor key ↑ or ↓ to highlight Internal Patterns. (menu 6-23)
2. Press ENTER to select.
The Internal Patterns menu will be displayed. (menu 6-24)
3. Push the cursor key ↑ or ↓ to highlight the desired Internal Pattern.
4. Press ENTER to select.
The selected Internal Pattern will be displayed.
R5976550 BARCO DUET II 10/05/2007
Duet II Interface
Current = Off
Auto Menu dis On
Auto Menu dis Off
Please select item
Menu 6-22
6. Installation Mode
49