Connecting A Door Lock; Connecting An Exit Button; Connecting A Door Contact; Connecting A Door Lock Depending On The Lock Type - IDTECK iPASS IP-RFL200 User Manual

Connect +12V of power supply to Red wire.
●
Connect GND of power supply to Black wire.
●
2

Connecting a door lock

Connect (+) wire of door lock to +12V wire of power supply.
●
Connect (-) wire of door lock to white wire of reader module.
●
3

Connecting an exit button

Connect Green wire of exit button input to one wire between wires of exit button.
●
Connect GND wire of power supply to the other wire.
●
4

Connecting a door contact

Connect COM terminal of door contact to Blue wire of door contact input.
●
Connect NO terminal of door contact to GND (-) of power supply.
●
5

Connecting a door lock depending on the lock type

In a power fail safe, connect GND (-)wire of power supply to Yellow wire of door lock ty
●
pe input.
In a power fail secure, put a floating state on Yellow wire of door lock type input.
●
Connecting a door lock depending on the lock type p.12