Tcp/Ip Connection (Optional) - IDTECK GE313 Operating Manual

Figure: RS-485 Communication between multiple GE313 and a host PC

6 .7 TCP/IP CONNECTION (OPTIONAL)

U
Optional TCP/IP Module is required for TCP/IP communication to the host PC.
1. Connect RJ45 plug, LAN cable of the network system to RJ45 jack of the GE313.
2. If you install multiple GE313 and only one TCP/IP port is available, you may connect one GE313 to
TCP/IP then connect all GE313 units to RS485 multiple communication shown above.
3. Set a different COMM ID for each GE313.
4. Install and run the GE313 Application Software.
Figure: TCP/IP Communication between multiple GE313 and a host PC
21