Siemens TC37 Module At Command Reference page 9

AT Command Set
4.2 58
4.5 63
4.6 64
4.7 67
4.9 69
4.15 73
4.18 75
4.22 84
4.24 86
4.24.1 87
4.26 90
4.28 93
4.31 / 4.31.1 96 / 99
4.32 101
4.34 104
4.37 108
5.15 141
6.5 148
6.7 152
6.19 162
7.1.5- 7.1.14 181 - 193
7.1.3 185
7.2 / 7.3 194/196
TC3X_ATC_01_V04.00
AT+CALA Alarm mode not applicable to TC35 Terminal.
RTC initialization after wake-up into Alarm mode
described.
AT+CBST Transmission rate 14400 bps now supported.
AT+CCFC Description revised, examples added
AT+CCLK RTC initialization after wake-up into Alarm mode
described
AT+CFUN Chapter revised
AT+CHUP Note added: AT+CHUP implemented like ATH
AT+CLCK Description revised, examples for phone security lock
types and call barring added
AT+CMEE Setting not saved when ME is powered down
AT-CMUX Overview on Multiplex mode updated
AT+CMUX Restrictions on Multiplex mode updated
AT+COPS Chapter revised
AT+CPBR Description revised, examples added
AT+CPIN Description revised. Summary of actions to be taken
after authentication failure
AT+CPIN2 Description revised, examples added
AT+CPWD Description revised, examples added
AT+CREG Description revised, examples added
AT+CSMP Command
mandatory
AT^SBC Default setting of <current> described
Automatic shutdown explained in more detail
AT^SCKS URC not stored when ME is powered down
AT^M20 Description revised
Several AT+CEER location Ids and release causes added
URCs Further explanations relating to URCs
Usability of AT commands with or without PIN authentication: Both lists
updated
Page 9 of 204
syntax corrected, first parameter
29.05.2002