At^snfpt Call Progress Tones - Siemens TC37 Module At Command Reference

AT Command Set

6.25 AT^SNFPT Call progress tones

Test command Response
AT^SNFPT =? ^SNFPT: (list of supported <pt>s)
Parameter
See write command
Read command Response
AT^SNFPT? ^SNFPT: <pt> OK
Parameter
See write command
Write command The write command controls the Call Progress Tones generated at the beginning
of a mobile originated call setup.
AT^SNFPT=
<pt>
Response
OK
Parameter
<pt>:
Please note that the setting is stored volatile, i.e. after restart or reset, the default
value 1 will be restored. Also, there is no way to store AT^SNFPT to the user
defined profile.
Reference Note
Siemens
TC3X_ATC_01_V04.00
0 Call Progress Tones off
1 Call Progress Tones on (audible tones shortly heard on the
phone when ME starts to set up a call).
Page 166 of 204 29.05.2002