At+Fdffc Data Compression Format Conversion - Siemens TC37 Module At Command Reference

AT Command Set

3.9 AT+FDFFC Data Compression Format Conversion

Test command This parameter determines the ME response to a mismatch between the data
format negotiated for the facsimile session, reported by the +FDCS:DF
AT+FDFFC=?
subparameter, and the Phase C data desired by the controlling application,
indicated by the optional +FDT:DF subparameter, or the +FDIS=DF
subparameter for the +FDR operation.
Response
(list of supported <df>s) OK
Parameter
See write command
Read command Response
<df> OK
AT+FDFFC?
Parameter
See write command
Write command Response
OK
AT+FDFFC =<df>
Parameter
<df>
Reference Note
EIA PN-2388 Used for Fax Class 2 only
TC3X_ATC_01_V04.00
0 Mismatch checking is always disabled. The controlling
application has to check the +FDCS: DF subparameter and
transfer matching data.
Page 48 of 204 29.05.2002