Siemens TC37 Module At Command Reference page 124

AT Command Set
Reference
GSM 07.05
TC3X_ATC_01_V04.00
Parameter
GSM 03.40 TP-Discharge-Time in time-string format: "yy/MM/
<dt>
dd,hh:mm:ss±zz", where characters indicate year (two last digits),
month, day, hour, minutes, seconds and time zone. For example,
6th of May 1994, 22:10:00 GMT+2 hours equals
"94/05/06,22:10:00+08"
depending on the command or result code: first octet of GSM 03.40
<fo>
SMS-DELIVER, SMS-SUBMIT (default 17), SMS- STATUS-
REPORT, or SMS -COMMAND (default 2) in integer format
<length> integer type value indicating in text mode (+CMGF=1) the length of
the message body <data> (or <cdata>) in characters; or in PDU
mode (+CMGF=0), the length of the actual TP data unit in octets
(i.e. the RP layer SMSC address octets are not counted in the
length)
<index> integer type; value in the range of location numbers supported by
the associated memory
<mid> GSM 03.41 CBM Message Identifier in integer format
<mr> GSM 03.40 TP-Message-Reference in integer format
<oa> GSM 03.40 TP-Originating-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tooa>
<pages> GSM 03.41 CBM Page Parameter bits 0-3 in integer format
<pdu> In the case of SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format: ME/TA converts each octet of TP data
unit into hexadecimal numbers containing two IRA characters (e.g.
octet with integer value 42 is presented to TE as two characters 2A
(IRA 50 and 65)). In the case of CBS: GSM 03.41 TPDU in
hexadecimal format.
<page> GSM 03.41 CBM Page Parameter bits 4-7 in integer format
<ra> GSM 03.40 TP-Recipient-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tora>
<scts> GSM 03.40 TP- Service-Centre-Time-Stamp in time-string format
(refer <dt>)
<sn> GSM 03.41 CBM Serial Number in integer format
<st> GSM 03.40 TP-Status in integer format
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in
integer format (when first character of <da> is + (IRA 43) default is
145, otherwise default is 129)
<tooa> GSM 04.11 TP-Originating-Address Type-of-Address octet in
integer format (default refer<toda>)
<tora> GSM 04.11 TP-Recipient-Address Type-of-Address octet in integer
format (default refer<toda>)
Note
The parameters <ra> and <tora> will only be displayed if AT^SSCONF=1 has
been set before. See Chapter 6.37 for details on AT^SSCONF.
Page 124 of 204 29.05.2002