At+Crlp Select Radio Link Protocol Param. For Orig. Non-Transparent Data Call - Siemens TC37 Module At Command Reference

AT Command Set
4.38 AT+CRLP Select radio link protocol param. for orig. non-transparent
data call
Test command Response
AT+CRLP=? TA returns values supported by the TA as a compound value.
+CRLP: (list of supported <iws>s), (list of supported <mws>s), (list of supported
<T1>s ) , (list of supported <N2>s )
OK
Parameter
See write command
Read command Response
TA returns current settings for the supported RLP version 0.
AT+CRLP?
+CRLP: <iws>,<mws>,<T1>,<N2>[,<verx>]
OK
Parameter
See write command
Write command Response
AT+CRLP= [<iws> TA sets radio link protocol (RLP) parameters used when non-transparent data
[,<mws> [,<T1> calls are originated.
[,<N2 >]]]] OK
Parameter
<iws>
<mws>
<T1>
<N2>
<verx>
Reference Note
· RLP version 0: single-link basic version;
GSM 07.07
· RLP version 1: single-link extended version (e.g. extended by data
· RLP version 2: multi-link version.
· Compression and multi-link are not supported.
TC3X_ATC_01_V04.00
0-61 Interworking window size (IWF to MS)
0-61 Mobile window size (MS to IWF)
48-78-255 Acknowledgement timer (T1 in 10 ms units)
1-6-255 Re-transmission attempts N2
0 RLP version number in integer format; when version
indication is not present it shall equal 0.
compression);
Page 110 of 204 29.05.2002