AT Command Set
4.39 AT+CRSM Restricted SIM access
Test command
Response
AT+CRSM=?
OK
Write command
By using this command the TE has access to the SIM database. SIM access is
restricted to the commands which are listed below.
AT+CRSM=<com
mand>[,<fileId>
As response to the command the ME sends the current SIM information
[,<P1>,<P2>,<P3>
parameters and response data. ME error result code +CME ERROR may be
[,<data>]]]
returned when the command cannot be passed to the SIM, but failure in the
execution of the command in the SIM is reported in <sw1> and <sw2>
parameters.
Response
+CRSM: <sw1>, <sw2> [,<response>]
OK / ERROR / +CME ERROR: <err>
Parameter
<command>
all other values are reserved; refer GSM 11.11.
<fileId>
<P1>,<P2>,<P3>
<data>
<sw1>, <sw2>
<response>
Reference
Note
GSM 07.07
TC3X_ATC_01_V04.00
176
READ BINARY
178
READ RECORD
192
GET RESPONSE
214
UPDATE BINARY
220
UPDATE RECORD
242
STATUS
integer type; this is the identifier for an elementary
data file on SIM. Mandatory for every command
except STATUS
integer type, range 0 - 255
parameters to be passed on by the ME to the SIM;
refer GSM 11.11.
information which shall be written to the SIM
(hexadecimal character format)
integer type, range 0 - 255
status information from the SIM about the execution
of the actual command. These parameters are
delivered to the TE in both cases, on successful or
failed execution of the command; refer GSM 11.11.
response of a successful completion of the command
previously issued (hexadecimal character format)
Page 111 of 204
29.05.2002