AT Command Set
5.12 AT+CSCA SMS service centre address
Test command
Response
OK
AT+CSCA=?
Read command
Response
+CSCA: <sca>,<tosca> OK
AT+CSCA?
Parameter
See write command
Write command
TA updates the SMSC address, through which mobile originated SMs are
transmitted. In text mode, setting is used by send and write commands. In PDU
AT+CSCA=<sca>
mode, setting is used by the same commands, but only when the length of the
[,<tosca>]
SMSC address coded into <pdu> parameter equals zero.
Note:
Response
OK
Parameter
<sca>
<tosca> Service centre address format GSM 04.11 RP SC address Type-of-
Reference
Note
GSM 07.05
In case of using no parameter after AT+CSCA= the content of <sca> will be
deleted.
TC3X_ATC_01_V04.00
this command writes the service centre address to non-volatile memory.
GSM 04.11 RP SC address Address value field in string format; BCD
numbers (or GSM default alphabet characters) are converted into
characters; type of address given by <tosca>
Maximum length of address: 20 characters
Address octet in integer format (default refer <toda> )
Page 138 of 204
29.05.2002