Atd><Mem><N> Originate Call To Phone Number <N> In Memory <Mem - Siemens TC37 Module At Command Reference

At command set cellular engines
Table of Contents

Advertisement

AT Command Set
2.6 ATD><mem><n> Originate call to phone number <n> in memory <mem>
This command allows you to dial a phone number from a specific phonebook. To initiate a call, enter
a two letter abbreviation for the phonebook <mem>, followed by the memory location <n> of the
desired entry. The location range of each phonebook can be queried by AT+CPBR (see Chapter
4.28).
Execute command
TA attempts to set up an outgoing call to the specified number.
ATD><mem>
Note:
<n>[<mgsm>][;]
Response
If error is related to ME functionality:
+CME ERROR: <err>
If no dialtone (parameter setting ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
If successfully connected and non-voice call:
CONNECT<text> TA switches to data state.
When TA returns to command mode after call release:
OK
If successfully connected and voice call:
OK
Parameter
<mem> phonebook:
<n>
<mgsm>
TC3X_ATC_01_V04.00
This command may be aborted generally by receiving a character during
execution. Abortion is not possible during some states of connection
setup such as handshaking.
<text> output only if +ATX parameter setting with value > 0.
Note:
" SM" SIM phonebook (storage depending on SIM card)
"FD" SIM fixdialling phonebook (pos. 1-7)
"LD" SIM last-dialling-phonebook (usually the last 10 numbers
dialed are stored on the SIM card, no matter whether or not the
calls were successfully set up)
"MC" ME missed (unanswered received) calls list (up to 10 numbers)
"RC" SIM received calls list
"ME" ME Phonebook (up to 50 numbers)
"ON" SIM (or ME) own numbers (MSISDNs) list
Note: <mem> must be included in quotation marks (""), if parameter
<mgsm> is used. If not, quotation marks are optional.
Integer type memory location in the range of locations available in
the selected memory, i.e. the index number returned by AT+CPBR.
I
Activates CLIR (disables presentation of own phone number to
called party)
Page 18 of 204
29.05.2002

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc35 moduleTc35 terminal

Table of Contents