Ats5 Write Command Line Editing Character; Ats6 Set Pause Before Blind Dialling - Siemens TC37 Module At Command Reference

AT Command Set

2.24 ATS5 Write command line editing character

Read command Response
ATS5?
<n> OK
Write command This parameter setting determines the character recognized by TA as a request
ATS5=<n>
to delete the immediately preceding character from the command line.
Response
OK
Parameter
<n>
Reference Note
V.25ter

2.25 ATS6 Set pause before blind dialling

Read command Response
ATS6?
<n> OK
Write command No effect for GSM
ATS6=<n>
Response
OK
Parameter
<n>
Reference Note
V.25ter
TC3X_ATC_01_V04.00
000-008-127 command line editing character
000-255 number of seconds to wait before blind dialling.
Page 29 of 204 29.05.2002