Siemens Defined At Commands For Enhanced Functions; At+Cxxcid Display Card Id (Identical To At^scid) - Siemens TC37 Module At Command Reference

AT Command Set

6 Siemens defined AT commands for enhanced functions

Self-defined commands do not have to be implemented in accordance with the official syntax. The
"+C" string can therefore be replaced by "^S" ("^" = 0x5E). If a self-defined command with the same
syntax will be included in future in the GSM recommendations, the command can be addressed with
both strings.

6.1 AT+CXXCID Display card ID (identical to AT^SCID)

Test command
AT+CXXCID=?
Execute command
AT+CXXCID
Reference
Siemens
TC3X_ATC_01_V04.00
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
Response
TA returns the card identification number in SIM (SIM file EF ICCID, see
GSM 11.11 Chap.10.1.1) as string type.
See ^SCID
Parameter
See ^SCID
Note
See also Chapter 6.6 AT^SCID.
Page 143 of 204 29.05.2002