At+Cusd Unstructured Supplementary Service Data - Siemens TC37 Module At Command Reference

AT Command Set

4.44 AT+CUSD Unstructured supplementary service data

Test command
AT+CUSD=?
Read command
AT+ CUSD?
Write command
AT+ CUSD=
<n>[,<str>[,<dcs>]]
Reference
GSM 07.07
TC3X_ATC_01_V04.00
Response
+CUSD: (list of supported <n> s) OK
Parameter
See write command
Response
TA returns the current <n> value.
+CUSD: <n> OK
If error is related to ME functionality:
+CME ERROR: <err>
This command allows control of the Unstructured Supplementary Service
Data (USSD) according to GSM 02.90. Both network and mobile initiated
operations are supported. Parameter <n> is used to disable/enable the
presentation of an unsolicited result code (USSD response from the network,
or network initiated operation) +CUSD:<m>[,<str>,<dcs>] to the TE.
When <str> is given, a mobile initiated USSD string or a response USSD
string to a network initiated operation is sent to the network. The response
USSD string from the network is returned in a subsequent unsolicited +CUSD
result code.
The interaction of this command with other commands based on other GSM
supplementary services is described in the GSM standard.
Parameter
0 disable the result code presentation in the TA
<n>
1 enable the result code presentation in the TA
2 cancel session (not applicable to read command
response)
string type USSD-string (when <str> parameter is not given,
<str>
network is not interrogated).
If <dcs> indicates that GSM 03.38 default alphabet is used
ME/TA converts GSM alphabet into current TE character set
according to rules of GSM 07.05 Annex A.
<dcs> GSM 03.38 Cell Broadcast Data Coding Scheme in integer
format (default 15)
<m> 0 no further user action required (network initiated USSD-
Notify, or no further information needed after mobile
initiated operation)
1 further user action required (network initiated USSD-
Request, or further information needed after mobile
initiated operation)
2 USSD terminated by network
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Note
· For the write command <dcs>=15 is supported only.
· On an unsolicited result code with parameter <m>=1 a '> ' is given for
further user action. The user action is finished with a <ctrl-Z> or aborted
with <ESC>.
Page 116 of 204 29.05.2002