At+Cpin2 Enter Pin2 - Siemens TC37 Module At Command Reference

At command set cellular engines
Table of Contents

Advertisement

AT Command Set

4.32 AT+CPIN2 Enter PIN2

Test command
Response
AT+CPIN2=?
OK
Read command
Response
AT+CPIN2?
TA returns an alphanumeric string indicating whether some password is required
or not.
+CPIN2: <code> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<code>
Write command
Response
AT+CPIN2=
The write command lets the ME store the entered password. This may be for
<pin>[,<new
example the SIM PIN2 to benefit from the features listed below, or the SIM PUK2
pin>]
to replace a disabled PIN2 with a new one. Note that PIN2 can only be entered if
PIN1 authentication was done.
OK
If error is related to ME functionality:
+CME ERROR: <err>
If the ME is requesting SIM PUK2, use <pin> to enter the PUK2, followed by
<newpin> to specify your new PIN2.
Parameter
<pin>
<new pin>
Reference
Note
Functions accessible only after PIN2 authentication:
· AT+CACM: Accumulated call meter (ACM) reset or query
· AT+CAMM: Accumulated call meter maximum (ACMmax) set or query
· AT+CLCK: Facility lock to "FD" (Fixed dialling phonebook)
· AT^SLCK: Facility lock to "FD" (Fixed dialling phonebook)
· AT+CPWD: Change "P2"password
· AT^SPWD: Change "P2"password
· AT+CPUC: Price per unit and currency table
· AT+CPIN2: Enter SIM PIN2 or SIM PUK2 if requested.
TC3X_ATC_01_V04.00
READY
SIM PIN2
SIM PUK2
password (string type), usually SIM PIN2 or, if requested, SIM PUK2
if the requested code was SIM PUK2: new password (PIN2.
See Chapter 4.31.1 for more information about when you may need
to enter the PUK.
For example, SIM PIN2 will be needed when you attempt to edit the "FD"
phonebook and ME returns +CME Error 17 or +CPIN: SIM PIN2.
Page 101 of 204
ME is not pending for any password
ME is waiting for SIM PIN2.
This <code> is returned only when PIN2
authentication has not yet been done or has failed
(+CME ERROR:17).
ME is waiting for SIM PUK2.
This <code> is returned only when PIN2
authentication has failed and ME is pending for
SIM PUK2 (i.e. +CME ERROR:18).
29.05.2002

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc35 moduleTc35 terminal

Table of Contents