Installing And Putting A Tim Into Operation; Horizontal And Vertical Installation - Siemens SIMATIC NET TeleControl SINAUT ST7 System Manual

Installing and putting a TIM into operation

Note
Keep to the installation guide of the SIMATIC S7-300
Modules must be installed according to the installation guidelines of SIMATIC S7-300. You
will find information on installation and wiring up in the Operating Instructions "SIMATIC S7-
300, CPU 31xC and CPU 31x: Installation": You will find the operating instructions on the
Internet, see also the references in the Appendix.
4.1

Horizontal and vertical installation

Horizontal and vertical installation
You can operate the SINAUT ST7 components both in horizontally and in vertically installed
racks.
Permitted ambient temperature
The SINAUT ST7 components can be operated in the same temperature range specified for
the S7-300.
Table 4- 1
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10
Permitted ambient temperatures for the SINAUT TIM modules
Installation position
Horizontally installed rack
Vertically installed rack
Permitted ambient temperature (operation)
0 to 60 °C
0 to 40 °C
4
121