Antennas - Siemens SIMATIC NET TeleControl SINAUT ST7 System Manual

Industrial remote communication, station control system
Table of Contents

Advertisement

Properties of the SINAUT components
1.5 Mobile wireless components
1.5.2

Antennas

The ANT794-4MR GSM/GPRS antenna
The following antennas are available for use in GSM/GPRS networks and can be installed
both indoors and outdoors. The antennas must be ordered separately.
● Quadband antenna ANT794-4MR
You will find detailed information in the device manual. You will find this on the Internet on
the pages of Siemens Industrial Automation Customer Support under the following entry
ID:
16518558 (http://support.automation.siemens.com/WW/view/en/16518558)
Figure 1-33
Short name
ANT794-4MR
● Flat antenna ANT794-3M
Figure 1-34
Short name
ANT794-3M
58
ANT794-4MR GSM/GPRS antenna
Order no.
6NH9 860-1AA00
Flat antenna ANT794-3M
Order no.
6NH9 870-1AA00
Explanation
Quadband antenna (900, 1800/1900 MHz, UMTS);
weatherproof for indoor and outdoor areas; 5 m
connecting cable connected permanently to the
antenna; SMA connector, including installation
bracket, screws, wall plugs
Explanation
Flat antenna (900, 1800/1900 MHz); weatherproof
for indoor and outdoor areas; 1.2 m connecting cable
connected permanently to the antenna; SMA con-
nector, including adhesive pad, screws mounting
possible
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10

Advertisement

Table of Contents
loading

Table of Contents