Table of Contents
Advertisement
TIM 4R / TIM 4RD
Configuration
•
•
•
TIM can be operated in the role
•
•
•
Number of TIM 4R/4RD modules per S7-CPU or
PC
Local communication in the rack of an S7-300
•
•
•
Local communication in standalone mode
•
Work memory required on the S7 CPU
Message memory on TIM
•
•
Transmission protocols
Selectable protocols
Mode with dedicated line/wireless network
•
•
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10
Software for PG
TD7 software for CPU (required in conjunction
with CPU
)
1)
Storage of TIM configuration data
Station
Node station
Master station
Over backplane bus with the S7-300-CPU
Over backplane bus with other TIMs in the
rack
Over MPI interface of the S7-300-CPU
other CPUs, TIMs, and/or PCs
Over MPI interface of the CPU with CPUs,
other TIMs and/or PCs
Number of messages
Buffered
SINAUT ST7 protocol
SINAUT ST1 protocol
6.3 Technical specifications of the TIM 4 variants
SINAUT ST7 configuration software
•
for PG
SINAUT TD7 block library for CPU
•
on internal TIM flash memory
•
yes
•
yes
•
yes
•
Several, number depends on the communication
resources of the S7-CPU or of the PC
Possible using TD7onCPU
•
Possible
•
with
Possible over TD7onCPU (for S7-300 and
•
2)
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
Possible over TD7onCPU (for S7-300 and
•
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
At least 20 KB; actual requirements depend on
the amounts of data and range of functions
Approx. 10,000 messages
•
no
•
SINAUT ST7
•
SINAUT ST1
•
Modes:
•
–
Polling
–
Polling with time slots
–
Multi-master polling with time slots
Modes:
•
–
Polling
–
Polling with time slots
Technical specifications
1)
245
Advertisement
Table of Contents
