Siemens SIMATIC NET TeleControl SINAUT ST7 System Manual page 54

Properties of the SINAUT components
1.3 Properties of the TIM modules
The adapter cable is supplied with every TIM module with an integrated DCF77 radio clock.
It can also be ordered as a spare part under the number listed in the following table.
Table 1- 16 Adapter cable for a TIM 4 with integrated DCF77 radio clock
Order no. Description
6NH7700-0AD15 Adapter cable for connecting a DCF77 radio clock
integrated in a TIM, to adapt the internal connector
to the external BNC connector.
Cable length 1.5 m
The adapter cable is no longer available as sepa-
rate spare part.
Interface adapter cable
The TIM 4R / TIM 4RD has a second serial interface X3 (combined RS-232/RS-485). The
interface (8-pin RJ-45 jack) is accessible from below.
An adapter cable is required to connect the second serial port with an external modem or
other transmission device. At one end of this cable, there is an RJ-45 plug and at the other
end, a 9-pin D-sub miniature male connector to which the normal connecting cable to the
modem or transmission device can be connected.
The adapter cable is supplied with each TIM 4R/4RD module. It can also be ordered as a
spare part under the number listed in the following table.
Table 1- 17 TIM 4R / 4RD interface adapter cable
Order no. Description
6NH7700-0AS05 Adapter cable for connecting the 2nd serial RS-
232/RS-485 port integrated in a TIM 4R / 4RD to
convert the internal plug (RJ-45) to the 9-pin D-sub
miniature male connector required externally.
Cable length 0.5 m
The adapter cable is no longer available as sepa-
rate spare part.
54
Illustration
Illustration
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10