Siemens SIMATIC NET TeleControl SINAUT ST7 System Manual page 62

Industrial remote communication, station control system
Table of Contents

Advertisement

Properties of the SINAUT components
1.6 Radio clock components
Since the GPS antenna is an outdoor antenna, you should also install the available lightning
protection device.
Figure 1-37
The following figure shows the interconnection of the various GPS components (the adapter
cable 6NH7700-0AD15 is supplied with each TIM with an integrated DCF77 radio clock
receiver).
If lightning protection 6NH9831-8LA is used, this should be installed whenever possible at
the entrance to the building. To connect the lightning protection to the adapter cable of the
TIM, use a separate antenna cable (BNC female connectors at both ends, similar to the
antenna cable supplied with the outdoor antenna). You can either assemble this cable
yourself or purchase it from a dealer, for example from Hopf Elektronik GmbH
(www.hopf.com).
62
The GPS receiver module (left) and the recommended lightning protection device for
outdoor antennas (right)
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10

Advertisement

Table of Contents
loading

Table of Contents