Table of Contents
Advertisement
Installation and commissioning of the modems and routers
5.4 GPRS/GSM router MD741-1
Installation on a 35 mm standard rail
The SINAUT MD741-1 is intended for installation on DIN rails complying with DIN EN 50022.
There is a suitable fastener on the rear of the device.
Table 5- 8
Dimensions of the MD741-1 router
MD741-1
W x H x D (mm)
Depth with connected antenna / Ethernet cable (mm)
5.4.2
Connecting the MD741-1 to the TIM and antenna
The following figure shows how the GPRS router MD741-1 is connected to a TIM over its
Ethernet connector (IE) and how the SMA connector is connected to an antenna.
Figure 5-4
5.4.3
Prerequisites for operation
To use the MD741-1, the following requirements must be met:
● A subscriber contract with GSM network operator that supports GPRS
● SIM card for enabling GPRS for the user by the network operator
152
Connecting the MD741-1 to a TIM and an antenna
Dimensions
45 x 99 x 114
approx. 170
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10
Advertisement
Table of Contents
