Installation and commissioning of the modems and routers
5.8 ISDN dial-up modem MD4
Note
Following the reset, the settings made with the terminal program for the dedicated line
mode are deleted. The settings must therefore be transferred to the modem again using
the terminal program.
Factory setting on the DIL switch
When it ships, the modem has the following default settings:
● Standard profile 0: AT mode
● Reset OFF
When shipped, the switches are set as shown in the following figure.
Figure 5-51
226
Factory setting on the DIL switch
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10