Table of Contents
Advertisement
Installation guide
3.1 Installing the TIM 3V-IE variants in an S7-300
C7 control systems
C7-626/P DP
C7-633/P
C7-633 DP
C7-634/P
C7-634 DP
C7-635 Key
C7-635 Touch
C7-636 Key
C7-636 Touch
SIPLUS C7-613
SIPLUS C7-635 Key
Installation in a rack
With standard and compact CPU modules, the TIM can be inserted into any of the racks 0 to
3 but only in expansion racks 1 to 3 if these racks are connected to the CPU over the IM
360/IM 361 interface modules.
With the C7 control systems, the TIM can be inserted in any of the expansion racks 1 to 3.
These are connected to the C7 device over IM 360/IM 361 interface modules (the IM 360 is
already integrated in the C7 device). With the C7-635 and C7-636 devices, this is also
possible without the IM 361 if no more than four modules including the TIM are connected
externally.
For all S7-300 racks the following applies: All slots designed for SM, FM or CP can also be
used for the TIM.
A bus module connector ships with every TIM. The TIM is connected to the module to its left
by the bus module connector.
88
Article number
6ES7 626-2DG02-0AB3
6ES7 626-2DG03-0AE3
6ES7 626-2DG04-0AE3
6ES7 633-1DF00-0AB3
6ES7 633-1DF02-0AE3
6ES7 633-2BF00-0AB3
6ES7 633-2BF01-0AE3
6ES7 633-2BF02-0AE3
6ES7 634-1DF00-0AB3
6ES7 634-1DF02-0AE3
6ES7 634-2BF00-0AB3
6ES7 634-2BF01-0AE3
6ES7 634-2BF02-0AE3
6ES7 635-2EC00-0AB3
6ES7 635-2EC00-0AE3
6ES7 635-2EC01-0AE3
6ES7 635-2EC02-0AE3
6ES7 635-2EB00-0AB3
6ES7 635-2EB00-0AE3
6ES7 635-2EB01-0AE3
6ES7 635-2EB02-0AE3
6ES7 636-2EC00-0AB3
6ES7 636-2EC00-0AE3
6ES7 636-2EB00-0AB3
6ES7 636-2EB00-0AE3
6ES7 613-1CA02-4AE3
6ES7 635-2EC02-4AE3
SINAUT ST7 station control system
System Manual, 09/2016, C79000-G8976-C178-10
Advertisement
Table of Contents
