What Is Next; Connecting The Server To The Elan Subnet - Avaya CallPilot 600r Hardware Installation

Installing the server and peripheral devices
5. Plug the tape drive into the same single point ground and A/C power as the rest of
6. Power on the tape drive.

What is next?

Connect the server to the ELAN subnet and Avaya server subnet (if applicable).
Note:
Before you connect to the network, ensure that CallPilot has the latest antivirus software.
Do not install third-party antivirus software unless approved by Avaya. For information about
the antivirus software packages that are approved by Avaya for CallPilot, see Product
Bulletin P-2007-0101-Global : CallPilot Support for Anti-Virus Applications. Also, ensure
your CallPilot application resides behind your network firewall.

Connecting the server to the ELAN subnet

Connect the CallPilot server to the Meridian 1 switch or CS 1000 system using the ELAN
subnet.
Important:
For important considerations about using the ELAN subnet in your network, see the Planning
and Engineering Guide (NN44200-200).
34 Avaya CallPilot® 600r Server Hardware Installation
Note:
Avaya does not recommend connecting older SCSI protocol terminators, as this
can affect server performance.
the system.
Note:
Your 600r comes with the tape drive drivers preinstalled. During the loading of
Windows, the system automatically detects the tape drive and loads the drivers
that are necessary to operate the tape drive. When system startup is complete,
the tape drive is ready for use.
December 2010