Table of Contents
Advertisement
Installing the server and peripheral devices
Web-enabled PC. Ensure that CallPilot has the latest antivirus software. Do not install third-
party antivirus software unless approved by Avaya. For information about the antivirus
software packages that are approved by Avaya for CallPilot, see Product Bulletin
P-2007-0101-Global : CallPilot Support for Anti-Virus Applications.
Media Access Control address
The Media Access Control (MAC) address is a unique number assigned to network cards and
controllers. You can find the MAC address bar code label located on top of the chassis, directly
above the front main push-button power switch. Two MAC addresses are shown on the label.
The CLAN MAC address is the top MAC address, labeled MAC1, while the ELAN MAC address
is labelled MAC2.
To connect the server to the Avaya server subnet
1. On the back of the server, locate the CLAN connector.
2. Connect an RJ-45 network cable from the CLAN Ethernet switch or hub to the CLAN
What is next?
Continue with
36
Avaya CallPilot® 600r Server Hardware Installation
Note:
The CLAN connector is labeled 1 on the rear panel of the 600r. For the connector
location, see the diagram on
connector.
Note:
When connecting the optional Avaya server subnet, do not connect to the network
until you ensure that CallPilot has the latest antivirus software. Do not install third-
party antivirus software unless approved by Avaya. For information about the
antivirus software packages that are approved by Avaya for CallPilot, see Product
Bulletin P-2007-0101-Global : CallPilot Support for Anti-Virus Applications. Also,
ensure your CallPilot application resides behind your network firewall.
Installing the Avaya software feature dongle
Figure 7: Rear panel
on page 31, Label I.
on page 37.
December 2010
Advertisement
Table of Contents
