To replace the server cover
When you finish inspecting the interior of your server, replace the server cover.
1. Attach the ESD strap to your wrist and attach the other end to a known grounded
2. Place the cover on the server and align the cover with the chassis tab guides.
3. Slide the top cover back until it stops.
What is next?
Continue with the hardware installation,
page 29. Or, for more information, see
Avaya CallPilot® 600r Server Hardware Installation
connection.
Installing the server and peripheral devices
Installation overview
on page 23.
To replace the server cover
on
December 2010
27