Rear Panel Controls And Features - Avaya CallPilot 600r Hardware Installation

Label
E Minor fault LED
F Power LED
G Disk 0 Activity/Fault LED (green/amber)

Rear panel controls and features

The following diagram shows the back panel controls and features. On the right is the AC
power supply bank. The PCI card bracket is in the middle of the back panel, while the
connectors and ports are along the bottom and the left side.
Note:
Avaya provides only AC power supply. The server works with a DC-to-AC converter,
however, you must ensure converter meets AC requirements as specified on label of power
supply cover. To access the power supply cover, remove server cover. For more information
about the server cover, see
Figure 3: Rear panel
Table 2: Rear panel
Label
A USB 0, USB 1, USB 2
(labelled 0, 1, 2 on the
server)
B PS/2 Mouse
C SCSI port
Avaya CallPilot® 600r Server Hardware Installation
Description
To remove the server cover
Description Label
G
H
I
Rear panel controls and features
Label
I Main power LED (green)
H not used
on page 26.
Description
Ground studs (used with system with DC
input power supply)
RJ45 NIC 2 Embedded Local Area Network
(ELAN) connector for the ELAN subnet
(engraved 2 on server)
RJ45 NIC 1 Customer Local Area Network
(CLAN) connector for Avaya server subnet
(engraved 1 on server)
Description
December 2010 13