Table of Contents
Advertisement
Installing the server and peripheral devices
Figure 10: Dongle without feature key
Figure 11: Installing the software feature key
3. Remove the front protection cover from the dongle.
4. Plug the dongle in to USB port 0, the bottom USB connector, on the rear panel of
38
Avaya CallPilot® 600r Server Hardware Installation
a. To open the dongle to insert the software feature key, gently push back
the clip on side of the dongle using a very small screwdriver and pull back
on the access door.
b. Insert the software feature key with the data contact facing down and
away from the embossed i. (For more information about installing the
software feature key, see
page 38.
the server.
Figure 11: Installing the software feature key
on
December 2010
Advertisement
Table of Contents
