Table of Contents
Advertisement
im Vertrieb von
Mounting the MLM-WB+
Selecting a mounting location
www.camboard.de
CAMBOARD Electronics
The procedures in this section enable you to securely mount the MLM-WB+ to a
masonry or nonmasonry wall. These procedures assume that you have already
unpacked the MLM-WB+ and installed necessary cables into the wall or conduits in
conformance with local and national electrical codes and equipment size
requirements.
The MLM-WB+ weighs about 57.5 pounds (26 kg) without equipment
installed. To avoid injury, use at least two individuals to unpack and
mount the MLM-WB+ and follow as a minimum these safe lifting and
moving guidelines:
•
Avoid lifting with the back.
•
Use both hands to hold the MLM-WB+.
•
Avoid unnecessary reaching, bending, or twisting.
All installation and service procedures should be performed by an Extron
CAUTION
authorized installer or a qualified electrician. Extron is not responsible for
equipment failure or damage occurring as a result of an improper
installation.
When determining a mounting location for the MLM-WB+, consider the following
factors.
Type of wall — This chapter contains installation instructions for both masonry
and nonmasonry walls. In addition, the thickness of the wall and the
accessibility of wall studs determine the number of mounting holes to be used
and whether toggle bolts are required.
Adequate clearance on all sides of the MLM-WB+ — Keep in mind that when
fully lowered, the door extends out about 20.5 inches (52 cm) from the front
of the MLM-WB+. Sufficient space is also required on each side of the
MLM-WB+ to remove the side panels, to route cables, and to access the rear
panel of any A/V device mounted in the 2U rack enclosure.
Proximity of the MLM-WB+ to installed cables — For example, if you plan to
route cables from the wall into the opening in the back of the MLM-WB+, you
should prepare the cables and position the MLM-WB+ accordingly.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
MLM-WB+ • Installation
2-5
Advertisement
Table of Contents
