im Vertrieb von
Enclosure mounting hardware
VCR installation and miscellaneous hardware
Door and shelf attachment hardware
Mounting the MLM-WB
www.camboard.de
CAMBOARD Electronics
(4) 1/4-20 x 2"
Pan Head Bolts
#40-375-01
(4) 1/4" Kap Toggle Assemblies
#40-374-01
(17) #440, 1/4" Pan Head Screws (12 preinstalled)
#40-208-01
(13) #632 Nuts with Washers (12 preinstalled)
#40-239-01
(20) #440, 1/4" Flat Head Screws
#40-307-01 (18 preinstalled)
(2) #832, 1/8" Hex Socket Screws
#40-358-01 (for door, preinstalled)
(2) #832, 3/16" Hex Socket Screws
#40-358-02 (for shelf)
(2) #1032 Nylon Shoulder Washers
#40-359-01 (preinstalled)
The MLM-WB is heavy—about 36 pounds (over 16 kg) without the VCR,
MLC, or AAP devices. To avoid back strain during installation, have
someone help you unpack the MLM-WB, hold it while you mark screw
locations, and help you attach it to the wall.
Installation and service must be performed by Extron authorized personnel or
CAUTION
a qualified electrician only.
Install the cables into the wall or conduits before installing the wall box, the VCR,
the MLC, and any AAP devices.
The installation must conform to national and local electrical codes and to the
equipment's size requirements.
Tel. 07131 911201
Fax 07131 911203
(6) 1/4" x 1 3/4" Masonry Screws
#40-373-01
(6) #14 x 1 3/4" Self-tapping Metal/Wood Screws
#40-372-01
(6) 1/4" x 1" O.D., 5/16" I.D. Metal Washers
#40-376-01
(8) #632, 5/16" Flat Head Screws
#40-213-01 (preinstalled)
(1) 3/32" Hex Wrench
(2) #832 Nuts with Washers
#40-343-01 (for shelf)
ce-info@camboard.de
MLM-WB • Installation
2-5