Table of Contents
Advertisement
im Vertrieb von
Adjusting the Door Lock
www.camboard.de
CAMBOARD Electronics
By default, the key to the door lock cannot be removed when the door is unlocked.
To adjust the lock so that the key can be removed at any time:
Remove the nut, washer, and cam and set them aside.
1.
2.
Remove the stop washer, flip it over, and then thread it back onto the screw.
Replace the cam, washer, and nut and tighten securely.
3.
Flipping the stop washer to adjust the door lock
Be sure to write down the number on the key and save the number in a safe
place. You will need the number to order replacements keys. Different
MLM-WB+ wall boxes may have differently numbered keys.
Tel. 07131 911201
Fax 07131 911203
Flip
ce-info@camboard.de
MLM-WB+ • Installation
2-17
Advertisement
Table of Contents
