Query Command; Show Command - SMART Embedded Computing PCIE-7217 Installation And Use Manual

Software
6.2.2.1

Query Command

Using the query command, FCU returns firmware information for a specific device (if used
with -d) or information about all firmware devices. The following code fragment shows a
sample output.
[root@pcie7217-s8-c1 ~]# fcu -q
********************[[[[[REPORT BEGIN]]]]]********************
Operation: Query
Product Name: PCIE-7217
#00 Device
Bank #0 -
#01 Device
Bank #0 -
********************[[[[[ REPORT END ]]]]]********************
6.2.2.2

Show Command

The show command does not access any device. It only operates with the firmware image
and it shows the metadata, which is part of the image. Furthermore, it validates the
firmware image to compare the checksum part of the metadata against the checksum of
the raw image. The output of the show operation is similar to the output of the query
operation. A sample output of the BIOS image is shown below.
[root@pcie7217-s8-c1 ~]# fcu -sf pcie7217-cpu-0.1.6.fri
********************[[[[[REPORT BEGIN]]]]]********************
Operation: Show
Manufacturer : ARTESYN
Board
#00 Device
Bank #0 -
#01 Device
Bank #0 -
********************[[[[[ REPORT END ]]]]]********************
The BIOS image has two images inside, the upper is for the first CPU and the other is for
the second CPU.
98
: pcie7217-cpld
Active Version: 00.01.04
: pcie7217-cpu
Active Version: 0.1.00000006
: pcie7217
: pcie7217-cpu
Version: 0.1.00000006
: pcie7217-cpu
Version: 0.1.00000006
PCIE-7217 Installation and Use (6806873A01B)
Software