Command Line Help; Tips - Lantronix SLC 8000 Series User Manual

Action Category
(continued)
connect bidirection|direct|global|listen|restart|script|terminate
|unidirection
diag
arp|arp6|internals|iperf|lookup|loopback|netstat|nettrace|pe
rfstat|ping|ping6|sendpacket|top|traceroute|usb
admin
banner|chip|clear|config|events|feature|firmware|ftp|keypad|
lcd|memory|quicksetup|reboot|shutdown|site|version|web
Terminates CLI session.
logout

Command Line Help

For general Help and to display the commands to which you have rights, type:
help
For general command line Help, type:
help command line
For release notes for the current firmware release, type:
help release
For more information about a specific command, type help followed by the command, for
example:
help set network or help admin firmware

Tips

Type enough characters to identify the action, category, or parameter name uniquely. For

parameter values, type the entire value. For example, you can shorten:
set network port 1 state static ipaddr 122.3.10.1 mask 255.255.0.0
to
se net po 1 st static ip 122.3.10.1 ma 255.255.0.0
Use the Tab key to automatically complete action, category, or parameter names. Type a

partial name and press Tab either to complete the name if only one is possible, or to display
the possible names if more than one is possible. Following a space after the preceding name,
Tab displays all possible names.
Should you make a mistake while typing, backspace by pressing the Backspace key and/or

the Delete key, depending on how you accessed the interface. Both keys work if you use
VT100 emulation in your terminal access program when connecting to the console port. Use
the left and right
Use the up

select one and edit it. You can scroll through up to 100 previous commands entered in the
session.
To clear an IP address, type 0.0.0.0, or to clear a non-IP address value, type CLEAR.

SLC™ 8000 Advanced Console Manager User Guide
arrow keys to move within a command.
and down arrows to scroll through previously entered commands. If desired,
15: Command Reference
325