Lantronix SLC 8000 Series User Manual page 292

Nicknames
Redisplay Menu
3. You have the following options:
- To save the custom menu without any more commands than the default logout
command, click the Add Custom Menu button.
- To add menu commands, select the QuickEdit Mode box. This will move the cursor from
Command to Nickname and back to Command (if Nicknames is selected), or keep the
cursor on Command (if Nicknames is not selected). Commands (and the optional
nicknames) are added to the Menu Commands/Nicknames list when carriage return is
entered at the Command field (if Nicknames is not selected) or the Nickname field (if
Nicknames is selected). Most browsers have a "Select All" keystroke (such as Control-A)
which allow you to select all of the text in a field; this can be used in conjunction with the
Delete key to clear the contents of a field before entering a new command or nickname.
The Clear Command & Nickname button can also be used to delete the contents of the
Command and Nickname fields.
Commands can also be added to the list when QuickEdit Mode is not selected. Enter the
command and the optional nickname and click the right
added before the logout command (if a command/nickname is not selected in the list) or
will replace the currently selected command/nickname in the list. The Unselect
Command & Nickname button can be used to unselect the currently selected command/
nickname in the list.
4. To add more commands to the custom menu, repeat step 3.
5. You also have the following options:
- To edit a command/nickname in the custom menu, select the command in the
Commands/Nicknames List box and select the left
command and/or the nickname, and with the same command still selected in the list,
select the right
- To remove a command/nickname from the custom menu, select the command in the
Commands/Nicknames List box and select the Delete Command & Nickname button.
- To move a command higher up in the menu (the commands are shown in the order they
will be presented in the custom menu, with command #1 listed first), select the command
in the Commands/Nicknames List box and click the up
- To move a command further down in the menu, select the menu in the Commands/
Nicknames List and click the down
6. Click the Add Custom Menu button.
To view or update a custom menu:
1. In the Custom Menus table, select the custom menu and click the View Custom Menu
button. The custom menu attributes appear in the lower part of the page.
2. Update the menu attributes following the instructions for adding a menu above.
3. Click the Edit Custom Menu button.
SLC™ 8000 Advanced Console Manager User Guide
Select to enable nicknames to be displayed in the menu instead of the
commands. If the custom menu will have nicknames, this should also be
selected prior to entering the commands in the web page, as this will facilitate
entry of the nicknames.
Select to redisplay the custom menu each time before the CLI prompt is
displayed.
arrow button.
arrow.
12: User Authentication
arrow. The command will be
arrow button. Change the
arrow.
292