Lantronix SLC 8000 Series User Manual page 144

Interval between status
updates
Interval between FW
and Config Checks
Firmware Updates via
ConsoleFlow
Configuration Updates
via ConsoleFlow
Reboot after Firmware
Update
Connect to Cloud
Device Attributes
Device Name
Device Description
Device ID
S/N
Registration Host
Registration Host
Registration Port
Use HTTPS for
registration
Validate certificates with
HTTPS
Messaging Host
Messaging Services
Messaging Host
Messaging Port
SLC™ 8000 Advanced Console Manager User Guide
Number of minutes between status updates sent from the client to the server.
Valid values are 1 - 60 minutes. The default is 2 minutes.
Number of hours between checks for firmware and configuration updates
initiated by the server. Valid values are 1 - 72 hours. The default is 24 hours.
If enabled, firmware updates can be initiated by ConsoleFlow for the SLC. The
device will check for updates per the frequency defined by Interval between FW
and Config Checks, and if a firmware update is found, the update will be
downloaded to the device and applied to the alternate boot bank. Enabled by
default.
If enabled, configuration updates can be initiated by ConsoleFlow for the SLC.
The device will check for updates per the frequency defined by Interval between
FW and Config Checks, and if a configuration update is found, the update will
be downloaded to the device and applied to the current boot bank, and the SLC
will be immediately rebooted. Enabled by default.
If enabled, the SLC will automatically reboot after a successful firmware update
via ConsoleFlow. Disabled by default.
If enabled, the SLC ConsoleFlow client uses Cloud server settings for
registration. Otherwise it uses On-Premise server settings. Enabled by default.
i.e., By default, ConsoleFlow Active connection is to Cloud.
The device name displayed in the ConsoleFlow server UI. Valid characters are
alphanumeric characters, dash "-", and underscore "_". The default is the
device type (SLC) with the last 4 characters of the Eth1 MAC address
appended.
Long description that is displayed in the ConsoleFlow server UI.
The unique device identifier. The ID is 32 alphanumeric characters. The ID may
be provisioned using Lantronix Provisioning Manager (LPM). Contact Lantronix
Tech Support for more information on LPM.
View-only field. Displays the serial number.
Hostname of the server the client registers with. The Host Name should start
with api.
The TCP port on the Registration Host. Defaults to 443.
If enabled, HTTPS (instead of HTTP) is used for registration. Enabled by
default.
If enabled, use a certificate authority to validate the HTTPS certificate. A
certificate authority file can be uploaded on the
default.
If enabled, messaging services are used for status updates and commands.
Enabled by default.
Hostname of the server used for messaging services. The hostname should
start with mqtt.
The TCP port on the Messaging Host. Defaults to 443.
7: Services
Web Server page. Disabled by
144