Command Help; Tips; Table 11-1 Action And Category - Lantronix Spider User Manual

Kvm-over-ip devices

Hide thumbs Also See for Spider:

Table of Contents

Action

Command Help

For general command help, type: help

For more information about a specific command, type help followed by the command, for

example:

help set network

type ? after the command:

set network ?

Type enough characters to identify the action, category, or parameter name uniquely. For

parameter values, type the entire value. For example, set network port 1 state static ipaddr

122.3.10.1 mask 255.255.0.0 can be shortened to se net po 1 st static ip 122.3.10.1 ma

255.255.0.0.

Use the Tab key to automatically complete action, category, or parameter names. Type a partial

name and press Tab to complete the name if only one is possible, or to display the possible

names if more than one is possible.

Should you make a mistake while typing, backspace by pressing the Backspace key or the Delete

key, depending on how you accessed the interface. Both keys work if you use VT100 emulation in

your terminal access program when connecting to the console port. Use the left and right arrow

keys to move within a command.

Use the up and down arrows to scroll through previously entered commands. If desired, select

one and edit it. You can scroll through up to 100 previous commands entered in the session.

When the number of lines displayed by a command exceeds the size of the window (the default is

20), the "Type more to see the next page" message displays. To display the next

page, type more and press Enter. You can override the number of lines (or disable the feature

altogether) with the set cli command.

To clear an IP address, type 0.0.0.0.

Spider™ and SpiderDuo® KVM-over-IP Device User Guide

11: Command Reference

Table of Contents

Spiderduo