Revision History - Lantronix SLC 8000 Series User Manual

Revision History

Date
March 2014
October 2014
June 2015
June 2016
January 2017
June 2017
September 2017 G
February 2018
March 2018
June 2018
August 2018
January 2019
March 2019
April 2019
SLC™ 8000 Advanced Console Manager User Guide
Rev. Comments
A Preliminary release.
B Initial document for firmware release 7.1.0.0.
C Updated for firmware release 7.2.0.0.
Changes include new operating atmosphere information and warning language in
Chinese and Korean. Software changes include additions in Telnet, SSH and TCP
timeout directions, number of sessions message, idle timeout message, VBUS
enabling, assert DTR, run web server, added mounted column information for
NFS Mounts, masked CHAP secret and DOD CHAP secret fields, USB devices in
diagnostics and addition of SSH bit option. SSL settings were removed so the
SSLv2 protocol option is no longer available.
D Updated for firmware release 7.3.0.0.
E Updated power cord information.
F Updated for firmware release 7.4.0.0 and for new dual SFP transceiver port or
dual Ethernet port capability options. Updated the following:
IPv6 Neighbor Table, Ethernet Bonding Status links, and IPv6 Forward Flag

under Network Settings.
IKE v2, x.509 Certificate, Certificate Authority/Certificate File for Remote Peer,

Certificate Authority/Certificate File/Key File for Local Peer, SA Lifetime,
Remote and Dead Peer settings under Network VPN.
Enable v1/v2c, Trap Version, Alarm Delay to SNMP, and Trap User Name,

Password and Passphrase under SNMP Services.
Added ability change and reset BootCount, BootDelay and BootLimit.

Updated part number.
H Updated for firmware release 7.5.0.0.
J Updated to include additional SLC hardware and new trap information for firmware
release 7.5.0.0.
K Updated for firmware release 7.6.0.1R6.
L Updated fail-over gateway details for Network Settings for firmware release
7.6.0.1.
M Updated for firmware release 7.7.0.0. Software changes include:
hostname resolution in local hosts table

extended device port timers range

new user notifications when connecting to a device port

support for iPerf3

support for dual channel USB devices

auto enable DTR on device ports

Xmodem support

device port baud rate can be set while connected to a device port

openSSH and openSSL upgraded

SNMP v3 SHA2 support

expanded support for HSPA+ gateway integration

N Updated for firmware release 7.8.0.0.
Added support for custom Expect scripts that can be connected to the SLC CLI or
a device port.
P Updated for firmware release 7.9.0.0.
Added support for custom Python and Tcl scripts.

4