Site Commands; Slc Network Commands - Lantronix SLC 8000 Series User Manual

Description
Displays current service settings.

Site Commands

Configure a set of site-oriented modem parameters that can be activated by various modem-
related events (authentication, outbound network traffic for DOD connections, etc.). The site
parameters will override any parameters configured for the modem. To use sites with a modem,
enable 'usesites'. Sites can be used with the following modem states: dialin, dialback, cbcpserver,
dialondemand, dialin+ondemand, and dialback+ondemand.
set site add|edit
Syntax
set site add|edit <Site Name> [<parameters>]
Parameters
name <Site Name> (edit only)
deviceport <Device Port # or Name or none> dialoutnumber <Phone Number>
usbport <U1|U2>
internal modem
auth <pap|chap>
loginhost <User Login/CHAP Host>
localipaddr <negotiate|IP Address>
remoteipaddr <negotiate|IP Address>
routeipaddr <IP Address>
routemask <Mask>
routegateway <Gateway>
nat <enable|disable>
Set the site password and CHAP secret (any extra parameters will be ignored):
set site dialoutpassword <Site Name>
set site chapsecret <Site Name>
Deletes a site:
set site delete <Site Name>
show site <all|names|Site Name>

SLC Network Commands

set slcnetwork
Syntax
set slcnetwork <one or more parameters>
SLC™ 8000 Advanced Console Manager User Guide
15: Command Reference
dialoutlogin <User Login>
allowdialback <enable|disable>
dialbacknumber <Phone Number>
dialbackdelay <Dial-back Delay>
dialbackretries <1-10>
timeoutlogins <disable|1-30 minutes>
modemtimeout <disable|1-9999 secs>
restartdelay <PPP Restart Delay>
cbcpnocallback <enable|disable>
401