Maintenance - avertX HD438 User Manual

DST (Daylight Savings Time)
Configure daylight savings time, if needed.
To configure DST:
1. Select the Start Time and the End Time.
2. Select the DST Bias.
3. Click Save to activate the settings.

Maintenance

Upgrade & Maintenance
Process the operations, including reboot, partly restore, restore to default, export/import the configuration
files, and upgrade the device.
Reboot: Restart the device.
Restore: Reset all the parameters, except the IP parameters and user information, to the default settings.
Default: Restore all the parameters to the factory default.
Note: Restoring the default settings will require setting the admin password again; the IP
address is also restored to the default IP address.
Device Parameters: Export the current configuration file of the camera. This operation requires the
admin password. The user will be required to create an encryption password for the exported file. The
encryption password is required when you import the file to other cameras.
Diagnose Information: Download log and system information.
Import Config. File: Configuration file is used for the batch configuration of cameras.
To import a configuration file:
1. Click Browse to select the saved configuration file.
2. Click Import and input encryption password to start importing configuration file.
37080AA
23