Table of Contents
Advertisement
Example: If motion is detected and triggers recording at 10:00, and the pre-record time is set
•
as 5 seconds, the camera starts to record at 9:59:55.
Post-record: length of time set to record after the end of event. The Post-record time can be configured
as 5s, 10s, 30s, 1 min, 2 min, 5 min or 10 min.
Example: If a motion event ends at 11:00, and the post-record time is set as 5 seconds, the
•
camera records until 11:00:05.
Stream Type: Select the stream type for recording.
Record Type: The record type can be Continuous or Motion.
Continuous: Video will be recorded automatically according to the time of the schedule.
Record Triggered by Motion Detection: Video will be recorded when the motion is detected.
Note:
Motion detection area must be enabled and configured for this function.
Capture Schedule
This camera includes an integrated microSD™ card slot that can be used to record images. The card slot
is compatible with a microSD™ card up to 128GB. This section is used to define when images should be
saved to the microSD card.
To configure the capture schedule:
1. Click on the time bar and drag the mouse to select the time period.
Note:
Click on the selected time period, you can adjust the time period to the desired time by
either moving the time bar or input the exact time period.
(Optional) Click Delete All to delete all schedules.
•
37080AA
48
Advertisement
Table of Contents
