Table of Contents
Advertisement
IMPORTANT SAFEGUARDS
1. Read Instructions
Read all of the safety and operating instructions before using the product.
2. Retain Instructions
Save these instructions for future reference.
3. Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance manufacturer as
they may cause hazards, damage product and void warranty.
4. Installation
Do not place or mount this product in or on an unstable or improperly supported location.
Improperly installed product may fall, causing serious injury to a child or adult, and damage to the
product. Use only with a mounting device recommended by the manufacturer, or sold with the
product. To ensure proper mounting, follow the manufacturer's instructions and use only
mounting accessories recommended by manufacturer.
5. Power source
This product should be operated only from the type of power source indicated on the marking
label.
PRECAUTIONS
Operating
•
Before using, make sure power supply and others are properly connected.
•
While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and then contact AvertX Customer Support.
Handling
Do not disassemble or tamper with parts inside the camera.
•
Do not drop or subject the camera to shock and vibration as this can damage camera.
•
Care must be taken when you clean the clear lens cover. Scratches and dust will ruin the
•
image quality of your camera. Do not use strong or abrasive detergents when cleaning the
camera body. Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to
remove, use a mild detergent and wipe the camera gently.
Installation and Storage
Do not install the camera in areas of extreme temperatures in excess of the allowable range.
•
(-22°F~ 140°F / -30°C ~ 60°C)
•
Avoid installing in humid or dusty places. The relative humidity must be below 90%.
•
Avoid installing in places where radiation is present.
Avoid installing in places where there are strong magnetic fields and electric signals.
•
Avoid installing in places where the camera would be subject to strong vibrations.
•
Never face the camera toward the sun. Do not aim at bright objects. Whether the camera is in
•
use or not, never aim it at the sun or other extremely bright objects. Otherwise the camera
may be damaged.
37080AA
3
Advertisement
Table of Contents
