avertX HD438 User Manual page 45

3. Select the Area by number.
4. Adjust the sensitivity and percentage of an object in the motion detection area.
5. Set the arming schedule and linkage method as in the normal configuration mode.
6. Click Save to save the settings.
Auto-Switch
1. Draw the detection area as in the normal configuration mode.
2. Select Auto-Switch for Scheduled Image Settings.
3. Select the Area by number.
4. Adjust the Sensitivity and Percentage of an object in the motion detection area for day and night
independently.
5. Set the arming schedule and linkage method as in the normal configuration mode.
6. Click Save to save the settings.
Scheduled-Switch
1. Draw the detection area as in the normal configuration mode.
2. Select Scheduled-Switch for Scheduled Image Settings.
3. Select the Start time and the End time for the day/night switch.
4. Select the Area by number.
5. Adjust the Sensitivity and Percentage of an object in the motion detection area for day and night
independently.
6. Set the arming schedule and linkage method as in the normal configuration mode.
7. Click Save to save the settings.
37080AA
45