Table of Contents
Advertisement
Maintenance
Upgrade & Maintenance
Process the operations, including reboot, partly restore, restore to default, export/import the
configuration files, and upgrade the device.
Reboot: Restart the device.
•
•
Restore: Reset all the parameters, except the IP parameters and user information, to the
default settings.
Default: Restore all the parameters to the factory default.
•
Note:
Restoring the default settings will require setting the admin password again; the IP
address is also restored to the default IP address.
Device Parameters: Export the current configuration file of the camera. This operation
•
requires the admin password. The user will be required to create an encryption password for
the exported file. The encryption password is required when you import the file to other
cameras.
Diagnose Information: Download log and system information.
•
Import Config. File: Configuration file is used for the batch configuration of cameras.
•
To import a configuration file:
•
1. Click Browse to select the saved configuration file.
2. Click Import and input encryption password to start importing configuration file.
Note:
The camera will need to reboot after importing configuration file.
Upgrade: Upgrade the device firmware.
•
To upgrade your device firmware:
1. Click Browse to select the local upgrade file and then click Upgrade to start remote
upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Do not disconnect the camera during
the upgrade process; the camera will reboot automatically after upgrade.
37601AA
26
Advertisement
Table of Contents
