Removing The I/O Module; Figure 8: Snap The I/O Module Into Place; Figure 9: Removing The I/O Module - WAGO -I/O-SYSTEM 750 Series Manual
2do 230v ac 2.0a/ relay 2no, 2-channel relay output module ac 230 v, dc 30 v, non-floating; 2 make contacts
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750 Series:
Table of Contents
Advertisement
26
Mounting
Figure 8: Snap the I/O module into place
With the I/O module snapped in place, the electrical connections for the data
contacts and power contacts (if any) to the fieldbus coupler/controller or to the
previous or possibly subsequent I/O module are established.
Pos : 60.11 /Serie 750 ( WAGO-I/O- SYST EM)/Monti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc @ 30334 @ 3 @ 1
4.2.2
Removing the I/O Module
1.
Remove the I/O module from the assembly by pulling the release tab.
Figure 9: Removing the I/O module
Electrical connections for data or power contacts are disconnected when removing
the I/O module.
Pos : 61 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
750-512 2DO 230V AC 2.0A/ Relay 2NO
Manual
Version 1.2.0
Advertisement
Chapters
Table of Contents
