Cleaning, Disinfecting/Sterilizing The Cavitron Scaler - Dentsply Sirona Sim Multi Bench Operating Instructions Manual

Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench
66 82 384 D3684
D3684.201.01.02.02 07.2019
5.3.3.3

Cleaning, disinfecting/sterilizing the Cavitron scaler

IMPORTANT
The work steps for sterilizing the Cavitron scaler are described in the
operating instructions for the "Cavitron Built-In Ultrasonic Scaler,
Model G139 with Cavitron Steri-Mate 360° Handpiece". They are
enclosed with the retrofit kit.
The silicon tip protector can be cleaned using mild commercially
available cleaning agents. It can be cleaned using spraying or wiping
and can be sterilized.
5.3.4 Change the cotton wool roll on the turbine hose and oil
collector
At the unit end of the high-speed handpiece hose, return air leaks out
along with a small amount of high-speed handpiece oil. This oil is
collected in a drip container by the cotton wool roll.
Dentist element
1. Slide the drip container down and remove the cotton wool roll.
2. Insert a new cotton wool roll and slide the container back up.
5 Care, cleaning and maintenance by the user
5.3 Instruments and instrument hoses
87