Changing Direction Of Rotation - Dentsply Sirona Sim Multi Bench Operating Instructions Manual

Dentsply Sirona
Operating Instructions Simulation Unit Sim Multi Bench
A/B
66 82 384 D3684
D3684.201.01.02.02 07.2019
4.4.8.6

Changing direction of rotation

The direction of rotation can be changed only with the motor stopped.
Counterclockwise rotation is performed without torque limitation.
Tip: After starting the electric motor with the foot switch, an audible
warning signal sounds 6 times if counterclockwise rotation is activated.
ü The electric motor is removed from its holder with torque control
switched on.
➢ Press the Counterclockwise rotation/user profile key briefly (< 2 s).
Ä The Counterclockwise rotation status display lights up when
counterclockwise rotation is set.
When the Endo function is switched on, counterclockwise rotation
cannot be activated via the C+ electronic foot control.
4 Operation
4.4 Dentist element
59