Modifications And Extensions To The Device - Dentsply Sirona Sim Multi Bench Operating Instructions Manual

2 Safety instructions

2.15 Modifications and extensions to the device

14
Modifications and extensions to the device
2.15
Modifications to this unit that might affect the safety of the operator,
users, or other persons are prohibited by law.
For reasons of product safety, this product may be operated only with
original Dentsply Sirona parts or parts expressly approved by Dentsply
Sirona. The user assumes the risk of unforeseen modifications and of
using non-approved parts and accessories. Dentsply Sirona is not liable
for resulting damages.
All units connected to this product must comply with the applicable
standards:
● IEC 61010-1 Safety requirements for electrical equipment for
measurement, control, and laboratory use
● IEC 61326-1 Electrical equipment for measurement, control and
laboratory use – EMC requirements
● IEC 62368-1-1 or IEC 60950-1 Safety of information technology
equipment (e.g. computer, monitor)
The simulation unit monitor must fulfill the requirements of the IEC
62368-1 or IEC 60950-1 standard.
If a system is created during the installation, then the creator is
responsible for the conformity of the system. In accordance with
Directive 2006/42/EC.
Operating Instructions Simulation Unit Sim Multi Bench
D3684.201.01.02.02 07.2019
Dentsply Sirona
66 82 384 D3684