Panel Identification - Fuji Electric FRENIC-EcoPAK Instruction Manual

Panel Identification

Each panel has a nameplate label, like the example pictured above,
FRENIC-EcoPAK
which contains important information about the panel. This label is located on the inside
of the hinged door on the enclosure.
CAUTION

Refer to the nameplate label to determine the panel input voltage and current
requirements prior to installation and wiring.

Refer to the nameplate label for the correct wiring diagram (Elementary Drawing).

Sizing of field wiring conductors should be based upon the current ratings listed on
the nameplate label.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Page 4 of 22