Configuring User - Siemens SIMATIC S7-1500 Function Manual

Web pages
3.16 User pages
3.16.2 Configuring user pages
Configuring user pages
Figure 3-71 Configure user-defined pages in STEP 7
To configure the user-defined pages in STEP 7, proceed as follows:
1. Select the CPU in the device configuration.
2. Open the settings in the Inspector window of the CPU under "Properties > General > Web
server".
3. Select the folder on your display device in which you have saved your HTML page in the
"User-defined pages" area under
4. Enter the name of the HTML page under
you start the application.
5. You can also specify a name for your application under
name is used to further divide or group the webpages. If an application name already
exists, the URL is displayed in the following format: http://a.b.c.d/awp/<Application
name>/<Page name>.html
6. In the "Extended" area, enter the file extensions that have to be checked for AWP
commands in input box
files with the extensions "htm" and "html". Here you can enter other file extensions that
you have used when creating your user page.
7. You can accept the number for the Web DB
you can assign a new number of your choice that is not assigned.
138
①
"HTML directory".
②
"Default HTML page" that is to open when
⑥
"Files with dynamic contents". By default, STEP 7 analyses
⑦
③
"Application name". This
and the fragment DB start number
Function Manual, 11/2019, A5E03484625-AG
⑦
or
Web server