①"Identification"
The "Identification" info box contains the plant and location designation and the serial
number. Plant and location identifiers can be configured in STEP 7 in the properties dialog of
the CPU in the "General" tab.
②"Order number"
The "Order number" info box contains the order number for the hardware.
③"Version"
You can find the hardware, firmware and bootloader versions in the "Version" info box.
"Program protection" tab
The "Program protection" tab provides information on whether the PLC program contains
know-how protection or copy protection.
Figure 3-8
① "Know-how protection"
Information on whether the PLC program contains at least one block with know-how
protection or not can be found in the info field "Know-how protection".
Web server
Function Manual, 11/2019, A5E03484625-AG
"Program protection" tab
Web pages
3.2 Diagnostics
39